In this article, I will be showing you ways that will enable you to answer the question of how to hide speaker wires in your home cinema or theatre. We will be exploring different options available to complete the task on the most economical budget. So, let’s get started!
So you’ve got a nest of wire strewn about your living room, home theatre, or bedroom like a bird’s nest. You’ve had enough of staring at it and trying to figure out how you’ll hide and conceal your speaker cable. There are several simple and cost-effective choices available.
Almost everyone looks forward to seeing movies on their surround sound system. However, if your room has speaker cable strewn around, it can detract from the room’s visual appeal. Furthermore, these cables can become a tripping hazard for you and your family in addition to being an irritation while vacuuming.
There are a variety of instances in which speaker wire must be run across a room. It’s typical in homes with surround speakers and a home theatre. Wires are too numerous in such systems to be ignored unless they are well hidden.
Although these extra cables can still be run along the baseboards, they will stand out in your room. On the other hand, trying to run the cable through the walls will rip your hair out because punching walls for wire concealment is difficult and, in most cases, impossible.
You might even start looking at wireless options to get rid of the cords that are strewn about your room at some time. Instead of going wireless, there are several ways to conceal subwoofer and surround sound speaker cords. We’ll show you how to efficiently hide speaker cords in this article.
The majority of these techniques will work with almost any type of wire or cabling. First, we’ll look at a solution within the speaker wire.
How to Hide Speaker Wires
- Speaker Wire Tape
- Frankever 50FT 16-Guage Speaker Wire Tape
- Concealer and Organizer for Cables
- Corner Duct Raceways
- Simple Cable Concealers
Speaker Wire Tape
Flat speaker wire tape is the greatest alternative if you want truly undetectable yet permanent wire installation without cutting holes or inserting wires through walls. These wires have a ribbon-like appearance and can be utilised in the same way as packing tape.
When you peel away the tape’s backing, the tape’s industrial-strength adhesive side is revealed. This sticky side adheres to any flat surface with ease.
You can use the Cord Cover Raceway Kit tape to completely cover the wire, even in corners, because wires are highly flexible and thin. You can even paint the outside of the tape to match the colour of the baseboard or wall.
Discreet speaker cables, on the other hand, are typically 16 gauge and have two or four conductors. For users who want to cover bi-amp speaker wires, the four-conductor option is ideal.
However, you’ll need flat wire terminal blocks with a single pair for each speaker if you utilise these kinds of cables. One side of the terminal block must be linked to the conventional speaker wire that connects to the speaker’s rear, while the other side must be attached to the flat copper wiring.
At the same time, it’s critical to accurately measure the flat speaker, follow the product’s instructions to the letter, and paint the finished product.
|Cord Cover Raceway Kit|
Frankever 50FT 16-Guage Speaker Wire Tape
It’s tough to get a nice flat adhesive speaker wire because many of them are weak and unreliable. Sewell’s Ghost Speaker Wire has proven to be one of the best solutions on the market in our experience.
The fact that this speaker wire is so flat is the feature that stands out the most. Flatter than the majority of speaker wires on the market. You may effortlessly place it under your carpet or any other flat surface due to its flat nature. At the same time, you can use it to run along walls or for audio in your automobile.
The cable on the speaker already has adhesive on it. All you have to do now is peel back the tape and apply it to the desired surface.
Furthermore, the tape is available not only for two-conductor speaker lines but also for four-conductor speaker wires, making it suitable for bi-amp speaker cables.
These conductors are 1 cm wide and wired using 16 AWG wires. The wire’s pure copper cable maintains optimum sound quality and can handle up to 10 amps.
The Ghost Wire after it has been painted is shown below. Now you can connect your speaker to your new terminals.
|Sewell’s Ghost Speaker Wire|
Concealers and Organizers for Cables
While there are several alternatives for concealing surround sound speaker wires, cable organisers and concealers are among the most successful. These gadgets are simple to use and hide the wire without looking out of place.
At the same time, these items are reasonably priced. This means that all speaker cords might be kept low-profile without spending a lot of money or time. Many alternatives, such as corner ducts, come with accessories including pre-applied adhesive backing, inside and outside corners, tee reducers, and fittings, all of which can help you tailor your wire management.
Having said that, while many of these choices disguise the wires, they are still visible to others.
Corner Duct Raceways
Although speaker wire tape is a good choice in the majority of circumstances, some users prefer other options. The corner duct cable raceway is a cost-effective alternative to wire tape for storing and disguising cables in the corner of a room or wires that run from the ceiling to the floor. It is suited for industrial, commercial, and residential applications.
These duct raceways are useful for keeping cables and speaker wires organised and protected from harm. This not only hides the unsightly speaker wire, but it also accommodates most cables and power connections.
Many of these concealers come in a three-sided channel configuration that is distinctive. Aside from that, these instruments have a pre-applied adhesive backing that will aid you during the installation process.
For some jobs, though, you may require additional screws or adhesive material.
The triangle-shaped ducts feature two nearby sides for mounting to right-angle walls, and the third hypotenuse side is mostly covered with a snap-on cover to make installation easy. Finally, the raceway’s simple form and ease of use make it ideal for quick cable maintenance and prevent wall structural damage while withdrawing the cable from the corner duct channel.
You can paint over these to match your wall as a finishing touch.
|Wiremold Cable Management Kit|
Simple Cable Concealers
The Yacaye Once-Cord Channel Cable Concealer is a comprehensive solution for all of your cable management needs. For optimum coverage, the initial kit has 8 cable channels. Each cable channel measures 0.59″ x 0.39″ x 15.7″, for a total of 125 inches. If you need more channelling for your speaker wire, choose the second option above, which gives you 250 inches of channelling (16 cable channels).
For easy application, the concealing package contains extra-strong self-adhesive tape. The cover mixes nicely with most decors thanks to its new slender and streamlined design. Most people, once again, choose to paint the channels to match the walls.
Here is a list of other duct raceways available to choose from
How to hide Speaker Cables in a Carpeted Room?
Tuck Speaker wires Between Carpet and Baseboard
To hide your speaker cord, use this simple and effective hack. In general, this will only look well in a carpeted space. You can tuck your speaker wire under the bottom of your baseboards as you run it along the wall to your stereo/home entertainment components.
As you travel along the length of the baseboard, simply press the carpet down a little and tuck the wire in a little at a time. This is usually rather simple to accomplish, and no one will be able to tell if you do it correctly.
How to Hide Speaker Wires with Hardwood Floors?
There are a few options for dealing with this. The first option is to utilise one of the above-mentioned cable concealers or the ghost wire approach. You can also disguise your speaker wire under your baseboards or use one of the “wood coloured” wire raceways listed below.
Run a matching “wood grain” coloured raceway along the floor.
A+ Electric’s cable concealer includes an Electric Floor Cord Cover Kit, which is ideal for arranging any cord, including speaker cables.
When speaker cables are left unattended, they can become tangled bird nests. These cable concealers not only limit wire exposure to a minimum but also keep your room’s look and feel.
|Cord Cover Kit|
Other available options to choose from
For most people, speaker wires strewn about the house are an eyesore. Apart from that, they are a pain to vacuum and a potential safety issue that could lead to tripping mishaps.
The methods and products discussed above make it simple and cost-effective to get around this. The majority of these options may be utilised to hide any kind of wire, power cords, or cabling. Simply consider the channelling’s size about the diameter of your wires.
If you are building a new room or a studio, home cinema theatre I would suggest arranging everything from the start like drawing a map or a sketch of the things you will be needing in the room.
Then according to plan, you can trap all the wires or a pre-installed duct to avoid the external ugly looking scenario of different wires be it related to speakers, screen, sound system or electric wires.
But, for an existing room, you may choose any of the above-mentioned processes which are economical and budget-friendly.
Frequently Asked Questions (FAQs)
How to hide speaker wires without cutting?
Speaker Wire Tape is a type of tape that is used to cover the wires Flat speaker wire tape is the greatest alternative if you want truly undetectable yet permanent wire installation without cutting holes or inserting wires through walls. These wires have a ribbon-like appearance and can be utilised in the same way as packing tape.
How do you hide speaker wires in hardwood floors?
You can either use rugs or flat sticky wires and paint wood texture over them on hardwood floors, or you can utilise wood-textured raceways.
How do you cover exposed wires?
The most basic approach to making electric cables safe is to use electrical tape. As an added precaution, you use tape on capped live electric wires. On loose live wires that don’t fit the cap, the tape might be utilised. To fit into the cap, simply use tape over the live wire.
Can you run speaker wire under flooring?
You don’t want the gap to be too large; otherwise, the floor will’ spring’ in that location. If you already have a subfloor, you can use a circular saw to carve a channel through the middle. Simply ensure that the depth is correct and that there are no wires underneath it that you might cut.
Is it safe to have exposed wires?
Yes. This is not only a safe but also a good idea. To avoid snagging on passing ladders, wallboard, or other objects, tuck the capped wires entirely into the junction boxes. Install blank cover plates if the room will be used in the future.
Can you run speaker wire under laminate flooring?
Underneath a laminate floor, cables can be run. You can put speaker wires or telephone lines under a laminate floor by cutting a notch in the subfloor with a circular saw because it is not attached to the subfloor. If the flooring is concrete, run wires around the perimeter of the floor under the baseboard.