How to soundproof a mini ramp

In this article, I’ll show you how to soundproof a mini ramp and what kind of materials we can use to do so. I will discuss all options that can assist dampen the sound of skating a mini ramp, allowing you to ride for longer periods.

Riding mini ramps may be extremely loud, particularly if there are a lot of people riding or if the area around the ramp is limited. Neighbours, parents, and siblings may become irritated by the incessant noise and request that it be lessened. Fortunately, there are a few options for soundproofing a mini ramp so you can keep riding in peace.

How to soundproof a mini ramp?

Soundproofing a mini ramp requires a few important tips, including:

  • Using thick building material
  • Covering any openings like cracks or holes across the entire ramp
  • Metal Fencing
  • Adding foam to the back of the ramp
  • Changing your skateboard or the space surrounding the ramp

All of these choices, along with a few more actions, can help to lessen noise generated by skating a mini ramp.

Why you should soundproof a mini ramp?

Before going over the various options for soundproofing your ramp, it’s a good idea to go over the reasons why you should need to do so in the first place.

Although if you don’t have any neighbours or other individuals complaining about the noise, soundproofing your system is a good idea. The following are examples of personal reasons:

  • After a while, the sound starts to disturb you.
  • When skating on a mini ramp, it can be tough to hear what’s going on around you.
  • A mini ramp is located indoors

These are motives to soundproof your ramp in addition to the usual, good-natured scenario of wanting to make people’ skating more enjoyable. The quieter your little ramp is, the less of a nuisance you will be to others. This implies they are unlikely to object to you skating and you are allowed to do so.

Furthermore, ear protection from frequent, loud sounds is often a good idea for long-term ear care. Even when you are unlikely to lose your hearing due to the noises of skating on a mini ramp, you might certainly lose your hearing abilities.

Using thick building material

One of the simplest ways to soundproof your ramp also happens to be the first step. The ramp will be able to soak up some of the noise by using heavier construction materials.

Because plywood is used to construct the majority of ramps, it is the most crucial material to increase the thickness. This method may be difficult to implement if your mini ramp was purchased from a store and is made of a different material.

Plywood comes in a variety of thicknesses, ranging from 12 inches to 1 inch. Sizes in between are also widely available at hardware stores. Due to the increased expense, obtaining thick plywood for the entire ramp may be infeasible depending on the size of your mini ramp.

Materials Needed
Plywood

Condensing the transitions

The most prevalent spot in which a lot of noise is created is at the mini ramp transitions. This is where the micro ramp’s flat meets the ramp.

When constructing your mini ramp, include support directly at the changeover to prevent the plywood from flexing excessively underneath the rider’s weight. The thicker those supports beneath the ramp, which are often built of 2x4s, the less give the ramp will have.

Only thickening the supports can cause problems because the mini ramp’s surface must be able to yield and shift. As a result, the smartest move here is to use thick plywood for the ramp’s covering.

If you’re going to build a ramp out of varying thicknesses of plywood, be sure they’re all level before you start. Even if your small ramp’s last layer isn’t plywood, this is critical.

Increasing the thickness of the ramp’s top

The top of the little ramp, where skaters drop in, sees a lot of activity and maybe rather noisy. Using thick plywood or piling other items here during building can help attenuate the sound.

The biggest source of noise coming from the top of the ramp is when people using the mini ramp drop in or grasp the ledge, putting practically their entire body weight on one spot. Employ thicker plywood here and add a couple more supports underneath to aid with this.

Since skaters seldom skate the top of the ramp, this section of the ramp requires less give than the rest of the ramp.

Making extraordinary ramp sides

Another less common, but no less bothersome, away for a ramp to produce noise is if the entire ramp shakes. This can happen if there are insufficient supports beneath the plywood or if the plywood used to construct the ramp’s sides is too thin.

The sides of the ramp are a critical location where sturdy plywood is required. This would not only help to eliminate any creaking or shaking of the ramp, but it will also make for a much better ramp experience.

An average thickness of 34 plywood is required while increasing approximately 1 inch is not a terrible idea.

Filling up the gaps

Covering any gaps in the ramp is another important step that is frequently ignored. This covers any gaps between boards, cracks that have developed over time, metal coping ends, and potentially even the back of the ramp.

Mini ramps trap a lot of noise, but any openings might cause a lot of that absorption to be lost. While exiting the ramp, the sound can bounce and get stronger. This is particularly true for metal components, such as the railing, because metal rings out and can reverberate forcefully.

Covering any openings like cracks or holes across the entire ramp

Not only should holes and cracks in plywood be sealed to prevent sound from leaking, but they should also be addressed for the security and lifespan of your ramp. These can enlarge to the point where the mini ramp is no longer useable, as well as increase the cost of repairs.

Simple wood putty should suffice to repair a mini fracture or gap in the plywood of the ramp. Fill the hole with putty, let it cure, and sand it smooth so the ramp surface remains flat.

A fresh piece of plywood may be required if the mini ramp has more gaps and fractures. This is a considerably more time-consuming process, but it’s well worth it if you want to reduce the noise and make your mini ramp safe.

There are a few steps to replacing a part of the mini ramp’s surface:

  • Purchase new plywood.
  • Size the gap
  • Remove the void or crack.
  • Install the new surface using nails or screws.
  • Refinish

The thickness of the substitute plywood should match that of the ramp section being rebuilt. Alternatively, you’ll have to cut into it or build supports to get it to the same height. Once this has been gathered, it is time to determine the size of the hole from which sound is exciting.

The amount of replacement plywood you’ll need depends on the size of the crack. At the very least, you must be able to secure the new piece to the supports beneath it — this is an important aspect of the sizing. If the gap is fairly significant, it may be best to replace the surface layer of that piece. Nevertheless, because this is the most expensive choice, it should be shunned.

Cut out the damaged plywood once you’ve sized out where the nearest supporting studs are to the fissure. A circular saw or other equipment that can access the centre of the wood is ideal for this. Make sure not to cut the support below, as you’ll have to replace those as well.

Simply replace the cracked piece of plywood with the new one and fasten it in place. Screws are preferred since they endure longer, but nails will suffice in a hurry. Lastly, the ramp surface should be finished to match the rest of the item.

While repairing gaps and holes in the ramp’s surface may appear to be a hassle, it is one of the most effective ways to muffle your ramp and prevent sound from leaving. It also makes ramp riding safer and more enjoyable.

Tools Needed
Screws

Metal fencing

A ramp’s metal coping acts as a magnet for generating a lot of noise. The coping is likely to ring out as skaters grind on it, strike the lip, or drop it. Whereas the sound is pleasant, it can be annoying to neighbours and others.

Cover the ends of the metal coping with water to help lessen the sound. The inside is hollow because it is frequently made of metal piping. Filling the entire inside of the mini ramp with soundproofing material will prevent the metal from resonating. Unfortunately, this is not cost-effective, and it is unlikely to be time well spent. In most cases, simply sealing the ends should suffice.

There are several different materials available to cap off the metal coping. The following are a handful of the most frequent methods:

  • Foam insulation
  • Caps made of rubber
  • Pipe connections made of metal
  • Styrofoam filling

All of these approaches have their own set of advantages and disadvantages, as well as a price range. A mixture of them, such as applying insulation foam on the metal pipe for a few inches and then using rubber covers, may provide the best acoustics.

Foam insulation

Insulation foam is the finest option for getting the most bang for your dollars. Spray able foam cans are rather inexpensive, and one should have plenty to cap off the ends of any coping on your mini ramp.

Furthermore, insulating foam dampens sound under its composition. This implies that while it prevents sound from escaping, the level of any sound that does escape will be lowered.

Materials Needed
Insulation foam

Caps made of rubber

Rubber caps are a low-cost and simple method to finish off your metal coping. They’re commonly available, and you’ve probably already seen them about your house. Furthermore, because the rubber extends, one size fits most. Whilst it will do little to dampen the sound coming from the metal coping, it will help with insulating by reducing the quantity that escapes.

Materials Needed
Rubber caps

Pipe connections made of metal

Metal pipe connectors are the least preferred alternative, but if you don’t have any on hand, they’ll suffice. Instead of stopping or deadening the sound, these operate best to diffuse and move it. They can contribute to the echo because they are still metal. Furthermore, metal pipe connectors are typically costly and surely not worth it for soundproofing your mini ramp.

Materials Needed
Metal pipe connectors

Styrofoam filling

Finally, if you don’t have a lot of money to spend on dampening your metal coping, polystyrene isn’t the worst option. It’s widely available because it’s included in most packages these days, it’s easy to cut to fit into the pipe, and it has some of the same sound-deadening capabilities as insulating foam.

The primary challenge is properly filling the pipe’s end with it, as Styrofoam might leave minor gaps. Even so, as an early test to assess how much dampening could enhance the usability of your little ramp, it can perform wonders.

Materials Needed
Styrofoam

Adding foam to the back of the ramp

Lastly, putting a cover to the bottom of the ramp is a terrific way to keep sound at bay. When making a homemade micro ramp, it’s common to leave the back open to save money, which is the best option if you don’t care about soundproofing.

Under typical circumstances, however, many sounds will escape from the back. Placing some form of physical barrier at the back of the ramp is vital for reducing noise from the ramp.

Adding more plywood is by far the most costly and also the most efficient method to do this. This stage is completed by simply covering the rear during the actual establishment. For less expensive solutions, any covering may suffice. This could involve the following:

It will help if the material can surround the back of the ramp and create a substantial shield between the ramp’s bottom and the air. In most cases, the thicker the material, the finer. Again, the purpose is to trap the sound beneath the ramp, not to prevent it.

Putting foam to various portions of your ramp is a terrific method to drastically minimise the amount of noise it creates. The usefulness and cost of the options given vary, but any amount should help.

The basic concept is to cover the underside of the mini ramp with foam of any kind. These could take the shape of attachable soundproof panels or insulating foam sprayed along the ramp’s bottom.

The denser material that may be added around the source of the noise, the more it will be muffled. 

Foam is particularly suitable for this because it is light, thick, cheap, and sound-absorbing.

The foam should be placed in the following spots on the ramp:

  • Underneath transitions
  • On the supports’ sides
  • Immediately beneath the coping
  • On the sides of the ramps’ walls

Those are places that get a lot of use or have a big enough surface area to get a lot of foam coverage. Many of the places overlap with previous recommendations for heavier construction materials or covering coping. This is owing to the amount of noise these locations produce in general.

The installation of further damping on the ramp’s walls and across the support beams is distinctive to foam installation. These are particularly useful for installing soundproofing panels or insulating foam, as the case may be.

Because of the amount of area accessible, the walls of a ramp are an excellent location for dampening panels. The sound from above will filter through and try to discover new ways to get out. The dampening panels will help to prevent this by dampening the noise throughout the ramp.

The support beams can use any type of foam to dampen the sound of the plywood flexing above them. As the skater above moves around, it’s hard to keep the plywood from shifting. Even if you wanted to, skating the ramp would be far more difficult! Placing foam around the supports soaks up some of the unavoidable noises, making the experience more enjoyable.

Materials Needed
A large tarp
Tapestries 
carpets
cardboard

 

Conclusion

If you follow all of the procedures above, the noises made by your small ramp should be greatly decreased. Although skating will still be a noisy pastime, everyone involved should be able to tolerate it this way. On your newly soundproofed ramp, enjoy your skating experience.

Frequently Asked Questions (FAQs): How to soundproof a mini ramp?

What’s the best way to cover a mini ramp?

To speed up the procedure, cover the ramp with a plastic tarp. We have a big number of customers that live in areas where it is raining. Covering your skateboard ramp with a sheet is highly suggested.

Do skateboard ramps require planning approval?

In terms of size and durability, the skateboard ramp is substantial enough to be considered a built structure and hence comprises development. As a result, the construction on Page 2 2 cannot be considered allowed construction and hence needs planning permission.

How can you make a mini ramp waterproof?

The most common method for waterproofing your ramp is to paint it with paint made specifically for skate ramps. Paint protects your deck against a variety of weather conditions, including heat, moisture, and sunlight, as well as rainfall.

For a skateboard ramp, how thick should the plywood be?

We’ll use two layers of 3/8″ wide plywood to cover the ramp face, with a final layer of 1/8″ on top. Begin by pressing a 3/8″ sheet against the coping and attaching it to the 2x4s below. Repeat the process across the ramp, making cuts as required, until it’s covered.

Is it possible to skate on plywood?

 You can skate the two layers of plywood if you want. You’ll need to cover the unprocessed plywood to protect it from the sun and weather. Keep in mind that falling on plywood is more painful.

What exactly is SkateSeal?

SkateSeal is a high-quality protective coating designed exclusively for wooden skate ramps. SkateSeal was created with precisely the right amount of grip and slip for skating. SkateSeal creates a hard, fast surface that feels great underfoot while also protecting your ramp from the weather.

References

http://www.middle-age-shred.com/forum/viewtopic.php?f=20&t=5433

http://www.skateboard-city.com/messageboard/archive/index.php/t-246983.html

https://www.mountainviewtoday.ca/olds-news/skateboard-park-ramp-noise-solution-proposed-1815698
https://www.eng-tips.com/viewthread.cfm?qid=371147

http://www.skaterscafe.com/archive/index.php/t-93716.html

https://www.sfgate.com/homeandgarden/article/Skateboard-ramps-roaring-into-quiet-burbs-2510206.php