How to Soundproof Roll-up Garage Door?

In this blog, I will guide you through different ways and explain things to you step by step, through which you will be able soundproof your garage door or a roll-up garage door. These are quite inexpensive ideas that I will be sharing with you today. So, let’s start!

The garage is usually the last place on your mind when it comes to soundproofing your home; after all, it’s largely used to park vehicles and keep lawn and garden equipment, tools, outdoor toys, seasonal decorations, and other infrequently used goods.

Some individuals, however, use their garages for more than just storage; for example, if you’re in a band, you can use it to practise, if you enjoy working with your hands, you can use it as a workshop, if you work on cars, you can use it as a home-based auto repair shop, or even as a home office.

Noise may be an issue depending on how you use your garage. There are various holes in garage doors that allow the panels to move, allowing you to open and close the structure. Soundwaves can readily pass through those cracks, allowing outside noise to enter and internal noise to exit your garage.

If noise is a problem in your garage, there are a few simple things you can do to reduce it and create more peace on both sides of the door.

A roll-up garage door might be difficult to soundproof. A regular garage door, on the other hand, is straightforward to insulate. You can, however, take steps to limit incoming and outgoing noise to make your environment more comfortable.

How to Soundproof a Roll-up Garage Door?

A roll-up garage door contains 2-3-inch slats, air and sound waves can flow through to the garage, and a roll-up garage door can’t be entirely soundproofed, but here are some soundproofing recommendations for a roll-up garage door.

  • Fill up any gaps surrounding the door.
  • Use hanging fibreglass blankets
  • Blankets that absorb sound
  • Soundproofing blankets 
  • Moving blankets
  • Noise-Blocking drapes
  • Replace the Door

Reasons to soundproof your roll-up garage door

There may be several reasons you might opt to soundproof your garage here are a few of them:

  • The amount of noise that enters the space is being reduced.
  • Keeping sound from escaping the garage
  • Improving the garage acoustic

If you use your garage as a workshop or for band practice, for example, you may want as little noise as possible to distract you. Furthermore, soundproofing the garage door will help to keep loud noises from escaping the space.

Soundproofing your garage door can help increase the insulating qualities of the building in addition to reducing noise transmission.

Certain tactics can aid in heat transfer prevention, resulting in less warm and cooled air entering and exiting the room. As a result, the comfort level of your garage may be raised, and your utility expenses may be reduced.

Besides that making, your garage soundproof will be more open to many other uses like a studio room for instance or an office where you can have a peaceful environment to get your office work done without the hustle and bustle.

Types of Sounds

To ensure that you’re taking the proper steps to prevent sound transmission, determine the type of noise you’re seeking to eliminate, as different noises require different soundproofing strategies.

Sound can be divided into two categories:

  • Airborne Noise
  • Structure-Borne Noise

Airborne Noise

The first type, which is the most common, is airborne noise. It contains sounds from outside your garage, such as conversations, music, or power drills, which travel through the garage door.

The soundwaves produced by entity travel through the atmosphere and impact a solid object, resulting in this form of noise. As a result of the impact, vibration is produced, which may be heard as sound.

Structure-Borne Noise

Structure-borne noise, often known as structural or impact noise, is the second type of sound. Two instances are the sound of someone beating on your garage door or rain hitting the door. Structure-borne noise occurs when an object collides with a solid structure, such as your garage door. When an object collides with a structure, a vibration occurs, which can be heard as noise.

Whenever you hear a noise you want to get rid of, put your hands on the garage door to figure out what type of noise you’re dealing with. If there is a vibration associated with the sound, it is called structure-borne. If you don’t feel the vibration but still hear the music, it’s airborne.

Fill up any gaps surrounding the door

It is vital to cover all gaps around your garage door, regardless of their type, form, or size. Use weather-stripping tape to seal the gaps. Preventing noise from going through the openings, helps to keep pests like spiders and cockroaches out of the house. The crevices between the panels should be filled first when insulating a garage door. If light can get in through those cracks, you can be sure that noise will too.

You’ll be astonished how much noise you were able to get rid of this way. For the best results, choose tape made specifically for the garage, such as garage door weather-strip shields.

Material Needed
Weather Stripping Tape
Garage Door Weather Strip Shield

Use hanging fibreglass blankets

Although soundproofing roll-up garage doors with heavy materials are not possible, fibreglass blankets can be placed in front of the garage door. Fibreglass is one of the lightest materials available for garage doors. This means it’s easier to lift manually and puts less strain on the lifting components.

One of the most cost-effective materials is fibreglass. It is frequently less expensive than wood, and it may be more or less expensive than steel, depending on the door. It costs around the same as aluminium, but it is more insulating. The insulating value of fibreglass on a garage door can be much higher than that of wood.

Fibreglass also has the advantage of resisting rust. It will neither contract nor inflate as the temperature changes. It also won’t warp or rot when exposed to moisture, which is a common problem with wood. Fibreglass is a low-maintenance fabric, so it won’t take a lot of work or money to keep it looking good.

More light will enter your garage because fibreglass is semi-transparent. If you don’t want the extra light, you can always paint the fibreglass black. Fibreglass may also take on a multitude of colours and designs due to its pliability. You can even use a faux-wood finish to get a historic look without the high cost and maintenance of genuine wood.

Before installing them, you may need to cut them to resize and reshape them. Then you’ll use the required adhesives to secure it to the door.

Material Needed
Fibre-Glass Blankets

Soundproofing Acoustic Blankets 

Soundproofing a garage door with heavy soundproofing blankets is an inexpensive and effective method. You might use this as a temporary solution to a noisy door until you can install more efficient soundproofing, such as MLV or acoustic panels.

There are two methods for attaching blankets to your garage door. The first step necessitates the use of an adhesive such as spray glue or strong tape to keep the blankets in place. Spray the glue and attach the blanket to all the locations you want to cover, just as MLV and acoustic panels.

The second method for securing blankets to your garage door is to wrap them over them. Above the garage door, hang the blankets from a clothesline or curtain rods. When the blankets are in place, though, you won’t be able to open or close your door.

Both sides of the garage should be covered to have the best soundproofing effect. Yes, that may imply some unsightly blankets on your home’s exterior. Only an internal layer, on the other hand, will not absorb all of the noise you create within your garage, nor will it prevent all of the noise from outside.

Material Needed
Soundproof Blankets
Mass Loaded Vinyl
 Acoustic Panels
 Glue Spray

Moving Blankets

Soundproofing the door can also be done with moving blankets. This is a less expensive model that does not significantly impede lower bass frequencies. Higher and mid-frequency frequencies, on the other hand, will be unable to get through.

Instead of draping the moving blankets, we recommend placing them directly on the door. Use numerous layers to improve sound absorption. Because of their weight and thickness, these moving blankets are ideal for soundproofing. It’s preferable if they’re a tad thicker. To suit the objective, you’ll need to blend them with additional ways.

Material Needed
Moving Blankets

Noise Blocking Drapes

The noise-blocking curtains may appear to be a poor choice due to their thickness and weight. If you have the right curtains with enough thickness, the noise from the garage door will be significantly reduced.

Typically, these thick noise-cancelling drapes are used to decrease noise from windows and glass doors. They can, however, be used for a garage door or anywhere else. Hang the curtains from a curtain rod that is placed above the garage entrance. Make sure you have large curtains that wrap over the entire entrance.

They reduce sounds almost as efficiently as moving blankets, so expect a significant reduction in bass noise. This is a fantastic option for airborne noise like singing or other instruments. Noise-cancelling curtains also provide thermal insulation, allowing the room to be much warmer.

Material Needed
Noise Blocking Drapes

Replace the Door

If all of the above measures haven’t worked and your garage is still too noisy, it’s time to replace it.

Because most garage doors are hollow, sound can readily travel and reverberate through the material. You may replace it with a high-quality insulated garage door that is significantly denser and better at soundproofing.

Let me acknowledge that replacing your garage door is the costliest option on this list. Before deciding on a replacement, we recommend testing everything listed above.


As you can see, soundproofing your garage door is simple with a little planning and some basic soundproofing products to help minimise noise both inside and out.

Soundproofing a garage door is a simple DIY project that can be completed in a few hours with the correct materials and skills.

We hope you found these pointers useful, and best of luck with your project.

Frequently Asked Questions (FAQs)

How do I soundproof a roll-up garage door?

In this blog, we have discussed every possible and cost-effective solution in soundproofing a roll-up garage door in detail here is the summary:

  • Fill up any gaps surrounding the door.
  • Use hanging fibreglass blankets
  • Blankets that absorb sound
  • Soundproofing blankets 
  • Moving blankets
  • Noise-Blocking drapes

Above are the options one may take into consideration to soundproof a garage door.

Does garage door insulation helps with noise?

Soundwaves are absorbed by the insulation, which helps to limit the amount of noise that flows through your garage. If you’re thinking about installing an insulated garage door, make sure you take all of the essential measurements first.

How do sound panels work?

Due to the sound absorption materials used in the construction of soundproof panels, soundwaves are dampened and deadened. By controlling’ reverberation,’ which is what happens when sound bounces off walls, these panels will help to reduce both background noises and echoes.

How do you soundproof a metal garage?

The next step is to cover the garage floor with carpet. The carpet will reduce noise both inside and outside the garage by preventing sound from rebounding along with the flooring. Finally, ensure sure your garage door is substantial, as a hollow door allows sound to pass through considerably more easily.

Can I add insulation to my garage door?

Any sort of insulation can be used with metal garage doors. Fiberglass insulation batts are a cost-effective choice. DIY garage door insulation kits make insulating a garage door even easier. Pre-cut insulation, fasteners or tape, and sometimes accessories like gloves and utility knives are included in these packages.

How can I make my metal garage door Quieter?

What you can do to make a garage door quieter on your own. Rollers, hinges, tracks, and springs should all be lubricated. Use only metal-specific lubricants, such as 10W-30 motor oil. Using an oil can, apply the product and wipe away any excess with a rag.